Different footwear has different standards, the following are some common footwear inspection considerations for reference:

First, women's fashion shoes:

1, facial considerations:

1.1 climbing can not be twisted, uppers scratched, damaged. (such as leather type: toe cap, shoe cover and outer waist, there can be no bad leather, such as insect spots, scratches, pits, etc.). Whether the material of cattle velvet is faded, and whether it is equipped with double.

1.2 help surface can not be disobedient, not wrinkle, hemp surface. The toe must be smooth and free from horns.

1.3 The helper should not have floating lines or broken lines, nor should he have a bottom line or a jumper.

1.4 Whether the length of the shoe face is matched with the pair, the height of the inside and outside waist, the height of the back sill, etc.

1. 5 whether the head toe alignment is the same, and whether the correct comparison is correct.

1. 6 Compare whether the shoe upper has color difference, whether the bright haze and the rubbing effect are the same as the sample.

1.7 Trademarks Check whether the letters are correct or not.

1.8 The toe of the toe can not be creased or beaten. Check whether it climbs into the midsole (when taking cotton shoes, consider taking the front half of the front-end car line after the former Hong Kong Bao).

1. 9 Hong Kong Bao checks whether it has been pulled into the bottom floor, whether it has not entered or leaked Hong Kong Bao, or the hardness of Hong Kong Bao is not enough (especially Hougang Bao must be hard).

2, accessories notes:

2.1 all kinds of accessories: can not be broken, paint, hand scraping, flashing, can not be iron material, not easy to fall off.

2.2 The stitch length of the electric embroidery must be beautiful, cannot fall off, and there is no obvious color difference.

2.3 If the beaded surface is decorated with beads and studs, the firmness must be better (pulling and pulling, pulling to see if it falls).

3, the bottom note:

3.1 Check whether the midsole steel heart is made of Mengsteel or whether the bending resistance test is passed. Whether the midsole combination material conforms to the company's requirements, whether the midsole radian is consistent with the steamed bread, and whether the iron is curled or not.

3.2 Whether the sky hide is PU material, whether it has chromatic aberration and wear-resisting effect meet our standards. There is a gap between the heavens and the heels, or pulling out.

3.3 Whether it has passed the impact test and meets the company's requirements.

3.4 With the gap with the big bottom or pull off.

3.5 Whether it is firm in the process of assembly, screw nails with four teeth. Test the tension, the equipment is stable and not swingable, and the front palm is flat and not wavy.

3.6 Whether the nail on the seat is raised or collapsed. Whether there is a spike in the heel (protruding from the side).

3.7 Whether the outsole matches the waterproof platform.

3.8 outsole, can not fade, thickness, hardness to meet the standard.

3.9 There must be no foreign objects in the shoes. The nails in the shoes must be removed and removed.

3.10 Whether or not to wear the heels and whether the heels will shake unsteadily (this item 10 must be focused).

Second, the focus of horseshoe inspection

1, facial considerations:

1.1 climbing can not be twisted, uppers scratched, damaged. (such as leather type: toe cap, shoe cover and outer waist, there can be no bad leather, such as insect spots, scratches, pits, etc.). Whether the material of cattle velvet is faded, and whether it is equipped with double.

1.2 help surface can not be disobedient, not wrinkle, hemp surface. The toe must be smooth and free from horns.

1.3 The helper should not have floating lines or broken lines, nor should he have a bottom line or a jumper.

1.4 Whether the head toe alignment is consistent or not, and whether the comparison is correct.

1.5 Alignment Samples Whether the shoe upper has color difference, whether the light haze and the wiping effect are the same as the confirmed ones.

1.6 Trademarks Letters are checked for correctness and indispensable letters.

1.7 The toe of the toe can not be creased or beaten. Check whether it climbs into the midsole (when taking cotton shoes, consider taking the front half of the front half of the front line of Hong Kong Bao). 1.8 Hong Kong Bao checks whether it has been pulled into the bottom floor, whether it has not entered or leaked Hong Kong Bao, or the hardness of Hong Kong Bao is not enough (especially Hougang Bao must be hard).

1.9 shoe tube can not be unreasonable, can not wrinkle, zipper should be smooth, a lock.

1.10 The arched shape of the instep should be standard and not sagging.

1.11 Whether the zipper is smooth, whether it is slippery, whether the fastness is sufficient, and whether the trademark is correct.

1.12 Is the boot smooth? Whether the inside of the boot is smooth and whether the seam is in place.

1.13 Whether the boot is backwards.

2, accessories notes:

2.1 all kinds of accessories: can not be broken, paint, hand scraping, flashing, can not be iron material, not easy to fall off.

2.2 The stitch length of the electric embroidery must be beautiful, cannot fall off, and there is no obvious color difference.

2.3 If the beaded surface is decorated with beads and studs, the firmness must be better (pulling and pulling, pulling to see if it falls).

3, the bottom note:

3.1 Check whether the midsole steel heart is made of Mengsteel or whether the bending resistance test is passed. Whether the midsole combination material conforms to the company's requirements, whether the midsole radian is consistent with the steamed bread, and whether the iron is curled or not.

3.2 Whether the sky hide is PU material, whether it has chromatic aberration and wear-resisting effect meet our standards. There is a gap between the heavens and the heels, or pulling out.

3.3 Whether it has passed the impact test and meets the company's requirements.

3.4 With the gap with the big bottom or pull off.

3.5 Whether it is firm in the process of assembly, screw nails with four teeth. Test the tension. The equipment is stable and can't swing. The forefoot is flat and can't wave.

3.6 Whether the nail on the seat is raised or collapsed. Whether there is a spike in the heel (protruding from the side).

3.7 Whether the outsole matches the waterproof platform.

3.8 outsole, can not fade, thickness, hardness to meet the standard.

3.9 There must be no foreign objects in the shoes. The nails in the shoes must be removed and removed.

3.10 Whether or not to wear the heels and whether the heels will shake unsteadily (this item 10 must be focused).

Third, children's shoes inspection focus

1, facial considerations:

1.1 climbing can not be twisted, uppers scratched, damaged. (such as leather type: toe cap, shoe cover and outer waist, there can be no bad leather, such as insect spots, scratches, pits, etc.). Whether the material of cattle velvet is faded, and whether it is equipped with double.

1.2 help surface can not be disobedient, not wrinkle, hemp surface. The toe must be smooth and free from horns.

1.3 The helper should not have floating lines or broken lines, nor should he have a bottom line or a jumper.

1.4 Whether the head toe alignment is consistent or not, and whether the comparison is correct.

1.5 Alignment Samples Whether the shoe upper has color difference, whether the light haze and the wiping effect are the same as those of the sample.

1.6 Trademarks Letters are checked for correctness and indispensable letters.

1.7 The toe of the toe can not be creased or beaten. Check whether it climbs into the midsole (when taking cotton shoes, consider taking the front half of the front half of the line after the front of Hong Kong Bao). 1.8 Hong Kong Bao checks whether it has been pulled into the bottom floor, whether it has not entered or leaked Hong Kong Bao, or the hardness of Hong Kong Bao is not enough (especially Hougang Bao must be hard).

1.9 shoe tube can not be unreasonable, can not wrinkle, zipper should be smooth, a lock.

1.10 The arched shape of the instep should be standard and not sagging.

1.11 Whether the zipper is smooth, whether it is slippery, whether the fastness is sufficient, and whether the trademark is correct.

1.12 Is the boot smooth? Whether the inside of the boot is smooth and whether the seam is in place.

1.13 Whether the boot is backwards.

1. 14 Use magic shoes for hook hooks and hair adhesion.

2, accessories notes:

2.1 all kinds of accessories: can not be broken, paint, hand scraping, flashing, can not be iron material, not easy to fall off.

2.2 The stitch length of the electric embroidery must be beautiful, cannot fall off, and there is no obvious color difference.

2.3 If the beaded surface is decorated with beads and studs, the firmness must be better (pulling and pulling, pulling to see if it falls).

3, the bottom note:

3.1 Check whether the midsole steel heart is made of Mengsteel, whether the material in the bottom plate meets the company's standards, and whether the hot bottom is curled.

3.2 outsole, can not fade, thickness, hardness to meet the standard (50-55) degrees.

3.3 There must be no foreign body inside the shoe. The nail inside the shoe must be removed and removed.

3.4 Whether or not to try on the right foot, whether the high-heeled shoes will shake unsteadily (this item 10 must focus on attention).

Fourth, men's shoes inspection focus

Face considerations:

1.1 leather material can not be loose surface. (If leather type: Toe cap, shoe cover and outer waist, no bad leather material, such as insect spots, scratches, and mottles).

1.2 Toe can not be issued, after the closure of the joint to be positive. Both waist levels must be strictly determined and accurate.

1.3 The helper should not have floating lines or broken lines, nor should he have a bottom line or a jumper.

1.4 Whether the head toe alignment is consistent or not, and whether the comparison is correct.

1.5 Whether the eye-opening fastness is sufficient (male shoes with shoelaces). There must be no visible marks on the seat and no footing should be allowed.

1.6 Alignment Samples Whether the shoe upper has color difference, whether the light haze and the wiping effect are the same as the exact ones.

1.7 Trademarks Check whether the letters are correct and the letters are indispensable.

1.8 The toe of the toe can not be creased or beaten. Check whether it climbs into the midsole (when taking cotton shoes, consider taking the front half of the front-end car line after the former Hong Kong Bao). 1.9 Hong Kong Pos checks if there is a pull into the bottom panel, whether it has not entered or leaked Hong Kong Po, or the hardness of Hong Kong Po (especially Hougang Po must be hard).

1.10 Shoes can not be smooth, do not wrinkle, zipper should be smooth, the lock position should be strong.

1.11 There must be no nails inside, no delamination, no wrinkling. The color of the leather must be dyed, and the edges must not be different.

1.12 helper toe position, rear package position can not appear, the car line uniform, not jumper.

1.13 Men's shoes have eyelet buckles, inner shoes must be aligned, no flash, and punching should be smooth.

1.14 leather leather shoes to use all parts of the work together, with double to be sure.

1.15 Whether the Hong Kong treasure is pulled under the bottom plate. Is it soft foot?

Bottom note

2.1 Dirty force, whether it can meet the standards, due to men's shoes, the bottom of the adhesive, such as: hand to move under certain circumstances does not open the plastic, the other two waist can not be glue, the glue line to be controlled in the range, especially light-colored footwear .

2.2 There must be no kicks before and after the big bottom, the toe should be positive, and the SIZE of the upper and bottom must be correct.

2.3 outsole, can not fade, thickness, hardness to meet the standard.

2.4 Check whether the midsole is made of Mengniang steel, which is resistant to bending and whether the material meets the company's requirements.

2.5 There is a need to stick to the bottom out of the strip, there is no edge of the edge, must be smooth, not open plastic, lack of plastic.

2.6 post-processing of the big bottom must refer to the standard, not below the standard range.

2.7 All men's footwear should be smooth at the outsole. There must be no traces of steel cores, and there should be no bumps and kicks before and after the big bottom.

2.8 midsole, hot bottom is curled, insole adhesion is firm.

Robustness considerations

3.1 Rally. Material wear test passed.

3.2 Whether the finished cold test is passed.

3.3 Shoe tongue. Webbing. After the mention of the belt and other accessories in the area to reach the target.

Fives. More than 2CM female heel shoes inspection focus

Facial considerations

1.1 The surface of the shoe upper shall be smooth and smooth, and shall not be wrinkled. The size and position of the accessories shall be the same as the confirmation sample.

1.2 Rubbing color or coke type shoe treatment effect must refer to the confirmation sample.

1.3 There must be no wind, delamination or wrinkling within the inner area;

1.4 glue line can not be exposed more than 1MM, help pin position can not be made.

1.5 The insole must be firm and flat, and the insole must be made of 3mm thick latex.

1.6 The curling must be normal, 10MM-12MM is better, the film must be smooth.

1.7 nails can not burst with.

1.8 Large cargo must be tried through before inspection.

1.9 The size of the shoes should be suitable for the elasticity of the shoes. Do not press on the feet, squeeze the feet or beat the feet.

1.10 Wearing is not skewed and does not wobble.

1.11 Can't be skewed or kicked.