As a professional third-party inspection agency, there are certain inspection rules. Well, the following An-Ying list from the summary experience for everyone. details as follows:

1. Don't go to other provinces or regions farther away for inspection. You must go to the office before 8:30 in the morning to see if there are changes in the arrangements.

2, check the order, to understand what is the goods to be examined, inspection points are what.

3, do not order without inspection, this is a basic principle, but if the factory is far away or in a particularly urgent situation, you can first inspection, and in the inspection report in detail on the order number, article number, Shantou Contents, mixing methods, etc. are checked in order to obtain an order, and the sample is returned to the company for confirmation.

4. Liaise with the factory in advance to know the real situation of the goods and avoid empty roads. However, if this happens, you should write down the progress of the matter on the report and check the actual production of the factory.

5. If the factory puts empty cartons in the middle of the cartons of good goods, this is an obvious deception, and details the progress of the incident in the report.

6. According to AQL (my company's current use standard is MEL-STD-105D) random sampling of sampling standards, in order to improve the accuracy of sampling, we use a square root method, such as: a batch of goods for 50,000 or 500 boxes, So 500 = 22.36, randomly selected 23 boxes out of 500 boxes, then 200 (number of samples) ÷ 23 = 8 more than 16, and then take out each box (with 7 boxes only take 8 pieces) to reach the total sample size 200 Pieces.

7. The number of major or minor defects must be within the acceptable range of AQL. If the number of defects is on the margin of acceptance, increase the sample size to obtain a more reasonable ratio. If you are hesitant between acceptance and rejection, Please submit it to the company. 8. According to the order requirements and the basic requirements for inspection, carry out the drop test, check the size of the boring head, the outer box, the strength and quality of the carton, the general product code and the product itself.

9. The drop test should drop at least 2 to 4 boxes, especially for ceramics, glass and other fragile products.

10. The position of consumers and quality inspectors determines what tests need to be conducted.

11. If you continue to find the same problem in the inspection process, please do not just focus on one point and ignore the overall; in general, your inspection should include dimensions, specifications, appearance, function, structure, assembly, safety, Performance and other characteristics and related aspects such as testing.

12. If it is mid-term inspection, in addition to the quality aspects listed above, you should also look into the production line to assess the factory's production capacity in order to facilitate the early detection of the problems of delivery and product quality. You should know that the mid-term inspection The standards and requirements at the time of shipment should be more stringent.

13. After the inspection is completed, fill in the inspection report accurately and in detail. The report should be clearly written and the content is complete. Before the factory's signature is obtained, the content of the report, the company's standards, and your final judgment shall be clear and fair. Firmly explain to the factory without losing the principle. If they have different opinions, they can indicate it in the report. But in any case, they cannot quarrel with the factory, let alone fight.

14. If the inspection report is not accepted, the inspection report shall be sent back to the company immediately. If some errors are found in the inspection, it shall be stated on the report “In the case of receipt of the factory’s amendment to the wrong guarantee. The goods can be released."

15, if the test failed to pass, should be marked in the report to ask the factory how to do to strengthen the packaging of the amendment; if due to quality problems require the factory to rework, should report on the re-inspection time, and to the factory to confirm, sign.

16. QC should contact the company's telephone at least once a day to make full use of the factory's phone because schedules may change or there may be accidents. Each QC must strictly observe this, especially for those who are far away.

17. For products shipped for the first time, it is required to bring back samples to the company. You must specify on the sample: order number, article number and factory name, inspection time, QC name, etc., too large or too heavy The factory can be requested to ship it out. If it is not brought back, the reason should be stated on the report.

18. Fill in the "Statement Bill" correctly and give it to the accounting department on time.

19. We always require the factory to properly and reasonably cooperate with the QC work. This is reflected in their frequent and active participation in our inspection process. However, this does not mean that you have the right to dictate to them, let alone make it obvious. Unreasonable requirements for the bad influence of the company's image.

20. Keep in mind your dignity and honesty and integrity, rather than a meal or other special service, you must be responsible for your own actions. Only by working hard to finish the tasks assigned to you by the company can your personality be sublimated. .

An Ying product quality inspection counseling focused on integrity services, prices favorably, welcomed the inquiry. For more information, please pay attention to http://anyingqc.com/!